Form 3 – Exam Viewer – DHomesb Final Exam – CCNA Discovery: Networking for Home and Small Businesses (Version 4.0)
Which protocol is used to transfer files among network devices and perform file-management functions?
What is the function of the DNS server?
It assigns IP addresses to clients.
It accepts HTTP requests from clients.
It maps a hostname to a corresponding IP address.
It manages the domain that clients are assigned to.
A computer joins the network and announces itself to all hosts on the LAN. What type of message does
the computer send out?
As an assignment, a computer science student needs to present data in binary format. What are the two
possible values that the student can use? (Choose two.)
What type of message is sent to a specific group of hosts?
Which term is associated with logical addressing?
Media Access Control addresses
What destination IP address is used in a unicast packet?
a specific host
a group of hosts
all hosts on the network
the network broadcast address
Which value would be considered the physical address for data that is sent across an Ethernet segment?
Refer to the exhibit. Which option correctly represents the encapsulation of a packet that is sent by
Host1 to the web server?
What are two examples of peripheral output devices? (Choose two.)
What does the term “attenuation” mean in data communication?
loss of signal strength as distance increases
time for a signal to reach its destination
leakage of signals from one cable pair to another
strengthening of a signal by a networking device
Which network design layer provides a connection point for end user devices to the network?
Which two statements are true about local applications? (Choose two.)
They run on the network.
An example of a local application is e-mail.
They are accessed from a remote computer.
They are stored on the local hard disk.
They run on the computer where they are installed.
Which portion of the packet does a router use to forward the packet to the destination?
source IP address
destination IP address
destination MAC address
Refer to the exhibit. H1 can ping H2, H3, and the Fa0/0 interface of router R1. H2 and H3 but not H1
can ping H4 and H5. What is a possible cause for the H1 failure?
Router R1 has no route to the destination network.
Switch S1 does not have an IP address configured.
The link between router R1 and switch S2 has failed.
Host H1 does not have a default gateway configured.
Refer to the exhibit. If H4 sends a message to H1 and the destination MAC address is in the MAC table
for both Switch1 and Switch2, which host devices will receive the message?
hosts H1 and H4
all hosts that are connected to Switch1
all hosts that are connected to Switch1 and Switch2
Refer to the exhibit. Which statement is true based on the information that is shown in the exhibit?
All wireless devices that are connected to this AP must have an assigned SSID of College.
Any wireless client that is attached to this AP must have the same IP address and SSID.
The AP is not physically wired to the local LAN.
This configuration is found only in an ad hoc wireless network.
Refer to the exhibit. A home network is configured with the information in the graphic. A user tries to
manually create a new connection to the network using the SSID Ciscoclass. However, a connection
cannot be made. What could be the problem?
The SSID is case-sensitive.
The SSID must contain at least one number.
The SSID should be used with the default name.
The SSID must contain a minimum of 32 characters.
Refer to the exhibit. Assume that the command output is from a wireless DHCP client that is connected to
a Linksys integrated router. What can be deduced from the output?
The DHCP configuration on the router needs to be verified.
The WEP key or SSID needs to be verified.
The wireless connection is operational.
The wireless NIC driver or the NIC itself needs to be reinstalled.
What will be one result of using a wireless infrastructure when designing the communications infrastructure
for a new building?
Wireless devices will be easy to add or relocate.
Infrastructure installation will be difficult and expensive.
There will be less interference from outside electronic sources.
Data transmitted over wireless networks will be more secure than when transmitted over wired networks.
What is specified by the network number in an IP address?
the network to which the host belongs
the physical identity of the computer on the network
the node of the subnetwork which is being addressed
the broadcast identity of subnetwork
Refer to the exhibit. Given the use of default masks, which network will router R1 use as the destination
network for communications from PC1 to PC2?
Which two values represent the network number and default mask for the address 184.108.40.206? (Choose two.)
Which three address ranges can be used to depict private IP addresses? (Choose three.)
10.0.0.0 to 10.0.0.255
127.16.0.0 to 127.16.255.255
220.127.116.11 to 18.104.22.168
172.16.1.0 to 172.16.1.255
192.168.22.0 to 192.168.22.255
22.214.171.124 to 126.96.36.199
Under what circumstance would it be appropriate to use private IP addresses?
for communication between two ISPs
for a network that is directly connected to the Internet
for addresses that are used exclusively within an organization.
for a host with more than one direct connection to the Internet
Which part of the electromagnetic spectrum is commonly used to exchange data between a PDA and a computer?
Refer to the exhibit. The security policy of an organization allows employees to connect to the office intranet from their homes. Which type of security policy is this?
What wireless technology has the ability to communicate with many devices at the same time, makes use of the 2.4 GHz band, and is limited to low-speed, short-range communications?
Which type of network attack occurs when an unauthorized person tries to persuade a user to share a network user ID and password?
denial of service
Refer to the exhibit. An organization needs to connect PC systems that use private IP addressing to the Internet. The organization has multiple systems that need to access the Internet, but were only able to purchase one public IP address. What should be activated on the Linksys integrated router to achieve this goal?
A network administrator is setting up an application filtering firewall. Company security policy states that FTP sessions that are coming from the Internet and use the standard FTP port must be blocked. Which TCP/UDP port must the administrator block on the firewall to be in compliance?
What is the name for the contract between a customer and an ISP that specifies requirements for uptime and service response time?
How does a crossover cable make it possible for two “like devices” (for example, two switches) to communicate?
The transmit pins are disconnected and only the receive pins are used.
The transmit pins on one device are connected to the transmit pins on the other device.
The receive pins on one device are connected to the receive pins on the other device.
The transmit pins on one device are connected to the receive pins on the other device.
Which attribute must be the same for wireless devices on one network to be able to communicate with devices on a different network?
wireless equipment vendor
Which picture shows a USB port on a PC?
A college network administrator is planning a wireless LAN to provide service in the student lounge and outdoor patio. The requirements include a range of at least 80 meters and a speed of 30 Mb/s. Which wireless LAN standard meets these requirements?
Which type of computer has an integrated mouse?
What is true about a wireless access point that is equipped with an omnidirectional antenna?
concentrates signal in one direction
typically used in bridging applications
radiates the signal equally in all directions
provides the greatest transmission distance of all antenna types that are used by APs
What are two ways that a user can interact with an operating system shell? (Choose two.)
Refer to the exhibit. Assume that the exhibited output is from a host that is connected to a Linksys integrated router. What is the first thing that should be checked if using a bottom-up troubleshooting approach?
the default gateway on the host
the IP address on the host
the IP address on the router
the link status LED on the front of the router
the subnet mask on the host
For devices that do not autosense, which connection requires a crossover cable?
hub port to router port
PC to hub port
PC to switch port
PC port to PC port
Which statement is true about UTP cable termination?
Cables with RJ-45 connectors are always preterminated.
An RJ-45 connector is used on only one end of the UTP cable.
Up to 2 to 3 inches of cable may be untwisted at each end of the cable to allow for easier installation of the RJ-45 connector.
The RJ-45 connector should be pushed over the wire jacket for a smooth connection.
A local PC has the correct configuration that is required to access the network. A ping command that is sourced at the PC does not receive a response from a remote device. Which operating system command might be used to determine where the connection failed?
An administrator is troubleshooting a network problem that involves the inability of users to reach Internet sites. During troubleshooting, the administrator is able to successfully ping web sites by their IP address, but pings to domain names are unsuccessful. Which service is most likely at fault?
What two commands can be used to form a new binding if client information does not agree with the DHCP client table? (Choose two.)
Which installation option should be chosen when the current operating system is too damaged to work properly?
A user is unable to send e-mail. To begin troubleshooting this problem, the network technician uses the browser on the PC and tries to access some popular Internet websites. Which troubleshooting approach is being followed?
trial and error
Which two causes of networking problems are related to the physical layer? (Choose two.)
damaged cables and connectors
incorrect subnet mask
incorrect default gateway
Which statement accurately describes a recommended strategy for end users to employ when they interact with a help desk technician?
Provide as much information about the problem as possible.
Expect first-level help desk technicians to solve the problem, because they are highly-trained personnel.
Hand over the problem to the help desk professionals, then do not interfere with them.
At the beginning of the call, ask for the name and number of the supervisor of the help desk technician.
What does it mean when a problem is being escalated by a helpdesk?
The helpdesk is following up on a resolved problem.
The helpdesk has made the problem a lower priority.
The helpdesk has solved the problem and is closing the ticket.
The helpdesk is moving the problem to a higher level support staff